Research in Natural Hazards Engineering > Wind Engineering (WE-UQ)

getting nan result while using wind tunnel experiment event

(1/2) > >>

alibakhtiari9068:
Hello,

I am using wind tunnel test experiment as the event in WE-UQ.

0)My input json file contains pressure taps locations and pressure coefficients time history. But the program when run, gives me nan results.
1) How can I know when I'm using face id 5, which face of the cuboid I'm referring too.
2) What is the parameter period in the Jason file?
3) I have no other errors regarding other engines like Dakota and etc. (e.g. I'm considering at least one random variable in the parameters.)

Attached is my input json file. I guess the issue is regarding the input file because I get no errors but I get nan as results.
Could you help me through this.

Thanks in advance!

fmk:
face 5 is the roof. i see that the documentation is insufficient. i will update the documentation and provide you with an example. hopefully tomorrow.

fmk:
i attach a figure i will add to the documentation.

alibakhtiari9068:
Thank you for the clarification and the figure.
But the problem still exists:
0) I reduced the number of pressure taps to 1 for simplicity.
1) Pressure tap is located at face 1.
2) The only pressure tap contains a time history with the corresponding sampling frequency in the json file.

I attached the revised json file.

Thanks.

fmk:
thanks. can confirm issue. will look at over weekend to see if it the input file or app. looks like app at present.

Navigation

[0] Message Index

[#] Next page