SimCenter Forum

Research in Natural Hazards Engineering [Archived] => Wind Engineering (WE-UQ) => Topic started by: zpcfox on April 30, 2022, 07:42:32 AM

Title: Ask for help with run the calculation from the latestTime in OpenFOAM
Post by: zpcfox on April 30, 2022, 07:42:32 AM

Dear professor,
      Thanks for your help!There are some mistakes of the turbulent Inlet (TLNF) when I continue to run the calculation from the latestTime.I am sorry that it breaks off.I want to ask for your help about how to slove it!Thank you very much!
       Best wishes!

Title: Re: Ask for help with run the calculation from the latestTime in OpenFOAM
Post by: fmk on April 30, 2022, 09:51:12 PM

Is this a question related to your use of OpenFOAM in general or OpenFOAM through the WE-UQ or TinF SimCenter applications? If the former, this is not an OpenFOAM forum. If the latter, could you please attach a copy of the input file you are using for these applications.

thanks
frank

Title: Re: Ask for help with run the calculation from the latestTime in OpenFOAM
Post by: zpcfox on May 01, 2022, 03:38:26 AM

Dear fmk,these are some of my input files.Thanks for your help!

Title: Re: Ask for help with run the calculation from the latestTime in OpenFOAM
Post by: fmk on May 02, 2022, 03:47:10 AM

I need to see the WE-UQ input file. thanks.