SimCenter Forum

Research in Natural Hazards Engineering => Wind Engineering (WE-UQ) => Topic started by: stan_lw on May 02, 2021, 01:59:53 AM

Title: TInFFoam freezes at first time step
Post by: stan_lw on May 02, 2021, 01:59:53 AM

I tried running the homogeneous tutorial case with turbulentDFSEMInlet. At the first time step, the output is as follow:

Starting time loop
Time = 0.025
Patch: inlet eddy box:
    volume    :4
    maxSigmaX    : 0.5

The simulation freezes after displaying the above message, with no further output. I will send the case file through email, thanks.

Title: Re: TInFFoam freezes at first time step
Post by: stan_lw on June 04, 2021, 04:48:44 AM

To update, I recompile TInF with the updated source code and the issue is resolved.