SimCenter Forum

Research in Natural Hazards Engineering => Performance Based Engineering (PBE) => Topic started by: scott110 on December 04, 2021, 01:06:02 PM

Title: Damage and loss results are not available
Post by: scott110 on December 04, 2021, 01:06:02 PM

Hi
I have used PBE Application for a 4-story RC dual building with only one random variable under 40 earthquake records. After analysis is done, Igot thr following Error Damage and loss results are not available.
Can you help me how I can solve it?

6:21:05.539 Debug: WorkflowAppWidget::errorMessage "Loading Loss Results" ()
16:21:05.541 Debug: "Loading Loss Results" ()
16:21:05.549 Debug: WorkflowAppWidget::errorMessage "Could not open file: C:/Users/KPP/Documents/PBE/LocalWorkDir/tmp.SimCenter\\/DL_summary_stats.csv . Damage and loss results are not available." ()
16:21:05.551 Debug: "Could not open file: C:/Users/KPP/Documents/PBE/LocalWorkDir/tmp.SimCenter\\/DL_summary_stats.csv . Damage and loss results are not available." ()

Title: Re: Damage and loss results are not available
Post by: adamzs on December 05, 2021, 07:39:10 PM

Hi Scott,

Thank you for reaching out to us, I will help you figure out what goes wrong in the simulation.

The error you received could stem from a problem in the OpenSees simulation or in the damage and loss assessment. First, I suggest excluding the possibility of an OpenSees issue.

Please navigate to your working directory (C:/Users/KPP/Documents/PBE/LocalWorkDir), then go to the tmp.SimCenter folder and you should see a log.txt file there. If you shared that txt file here, it could help me a lot in understanding the issue better.

Thank you,
Adam