Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - mbenitez

Pages: [1]
1
Regional Hazard Simulation (R2D, rWhale) / Re: ["No results to import!"] Buildings taken as HC in LC/PC Zone
« on: April 01, 2022, 02:21:39 AM »
Hi Steve,

Thank you for sharing the great news! I will be on the lookout for the new version of R2D.

Best,
Mariana

2
Regional Hazard Simulation (R2D, rWhale) / Re: ["No results to import!"] Buildings taken as HC in LC/PC Zone
« on: March 30, 2022, 03:28:53 AM »
Hi Adam,

I conducted an in-depth research on the code evolution of El Paso, TX. Adobe buildings were approved and constructed well into the 1950s. I am currently preparing the python script to feed into R2D like in examples 7 and 8, but noticed that the option to add a script is not available for the HAZUS MH EQ IM damage and loss method. I have two questions: 1) how can I assign the HAZUS fragility curves in my python script, 2) what would be the best way to feed my python script into R2D.

I would greatly appreciate your help.

Mariana

3
Regional Hazard Simulation (R2D, rWhale) / Re: ["No results to import!"] Buildings taken as HC in LC/PC Zone
« on: February 01, 2022, 12:35:12 AM »
Hi Adam,

Thank you for the thorough explanation. Option 3 is definitely the route I am thinking of taking. I will take a look at examples 7 and 8 from the R2D documentation in the meantime. I will reach out to you in the near future if I need help preparing the script. Thank you.

Best,
Mariana

4
Regional Hazard Simulation (R2D, rWhale) / Re: ["No results to import!"] Buildings taken as HC in LC/PC Zone
« on: January 31, 2022, 06:57:14 AM »
Hi Steve,

You understood correctly. I have attached a sample of the building inventory. I tried to attach the shakemap scenario, but the post failed to upload. I used the East Franklin Mountains Fault scenario (https://earthquake.usgs.gov/scenarios/eventpage/bssc2014900_m7p03_se/shakemap/intensity). Thank you for looking into this.

Best,
Mariana

5
Regional Hazard Simulation (R2D, rWhale) / ["No results to import!"] Buildings taken as HC in LC/PC Zone
« on: January 27, 2022, 12:15:20 AM »
Hello,

My building inventory is in a Low-Code/Pre-Code zone and when I run a Shakemap Scenario, the fragility groups are not assigned properly. This is giving me a "No results to import!" message since there are no fragility groups for URM buildings in High-Code zones, per HAZUS' methodology. How can I make sure that the buildings are assigned to the correct zone?

I appreciate your help.

6
AI use in Regional Simulation (BRAILS) / Re: Queries about BRAILS installation
« on: March 23, 2021, 10:49:20 PM »
Hello,

I am also trying to install BRAILS in a Mac Big Sur Version 11.2.3 and I am receiving different errors. A text file with the errors from my terminal is attached.

I would greatly appreciate the help.
 
Thanks,
Mariana

7
Regional Hazard Simulation (R2D, rWhale) / Re: rWHALE - output DL data units?
« on: January 29, 2021, 02:27:23 AM »
Hello, I am trying to access the RDT Documentation through the link you provided Adam, but the site seems to not be working at the moment. When do you think it will it be up and running again?

Thank you!

8
Regional Hazard Simulation (R2D, rWhale) / Re: rWHALE: Anchorage, Alaska Datasets
« on: November 25, 2020, 01:15:41 AM »
Kuanshi,

Do you have an update regarding the updated Anchorage, Alaska datasets for rWHALE v2.2.0?

Thank you.

9
Regional Hazard Simulation (R2D, rWhale) / Re: rWHALE: Anchorage, Alaska Datasets
« on: October 30, 2020, 01:34:09 AM »
Thank you for the quick reply, Kuanshi!

Also, is the code for rWHALE v2.2.0 available on zenodo or github?

Regards,
Mariana

10
Regional Hazard Simulation (R2D, rWhale) / rWHALE: Anchorage, Alaska Datasets
« on: October 28, 2020, 05:14:15 PM »
Hello,

I am trying to run the datasets from the Anchorage, Alaska earthquake provided by the SimCenter in rWHALE remotely, however the output 'RegionalDamageLoss.csv' file does not appear anymore. It looks like there have been changes to the code, which is great, but I am not able to pinpoint where the error may be.

If someone is able to help, I would very much appreciate it.

Best,
Mariana

Pages: [1]