Research in Natural Hazards Engineering > Site Response Analysis (s3hark)

Problem running 2D analysis

(1/2) > >>

jmussat:
Hello,

The program doesn't run the analysis for a 2D Column 1D Shaking. It does run a 3D Column Bidirectional Shaking but if I try first a 2D analysis then the 3D doesn't.

I'm running v1.1.1 on Windows 10. 

I have attached the configuration file of a 2D Column + the screenshot of the profile, rock motion and slope parameters.

Thanks!

charles:
I did a quick test on mac, didn't reproduce this same issue. 
so it seems this is indeed a windows-specific issue.
I'll find a windows to test, will let you know soon. :)

jmussat:
Thanks! I tried it in Mac and worked fine. Needed to switch appearance to light mode

charles:
It's great that you confirm it works fine on mac.  :)
I had a chance to test it on windows.
It seems this is a problem caused by OpenSees 3.1 windows version, at least one material is not working.
We're rebuilding OpenSees and will let you know if it works.

Thanks for pointing out the dark mode appearance.
I seldom use dark mode, so never noticed that, until you pointed it out.  :D
I'll see what I can do about it.

charles:
Turned out it is caused by opensees 3.1.
The latest version opensees 3.2 is now available, the issue is gone.  :D


--- Quote from: jmussat on March 05, 2020, 02:46:26 PM ---Hello,

The program doesn't run the analysis for a 2D Column 1D Shaking. It does run a 3D Column Bidirectional Shaking but if I try first a 2D analysis then the 3D doesn't.

I'm running v1.1.1 on Windows 10. 

I have attached the configuration file of a 2D Column + the screenshot of the profile, rock motion and slope parameters.

Thanks!

--- End quote ---

Navigation

[0] Message Index

[#] Next page