Recent Posts

Pages: 1 ... 3 4 [5] 6 7 ... 10
41
Regional Hazard Simulation (R2D, rWhale) / PUENTE HILL MW7.1 SCENARIO (A SCENARIO-BASED SHAKING INTENSITIES)
« Last post by godfredababio332 on March 22, 2024, 12:55:36 AM »
Hello all,

I am trying to generate shaking intensities for a set of latitudes and longitudes (building site) using R2D backend code. I'm editing the simulation configuration Json file and I would like to know how to define the epicenter location (Puente Hill Mw7.1 Scenario). Attached is the configuration file.
42
Regional Hazard Simulation (R2D, rWhale) / Re: Error in DL calculation
« Last post by jyzhao on March 11, 2024, 07:18:41 PM »
Hello Bofan,

This is a flaw of the software that the output format of the earthquake simulation tool is different from the input format of R2D HAZ panel. The earthquake simulation tool uses "SA(0.01)" to represent spectral acceleration at 0.01s, while the HAZ panel uses "SA_0.01" (See the input files of R2D example 14 at https://github.com/NHERI-SimCenter/R2DExamples/blob/master/E14BasicHAZUSTransportation/input_data/IMs/S_001_1000.csv for an example) to represent spectral acceleration at 0.01s.

To resolve this issue, please rename the columns in the output of the earthquake simulation tool so the R2D HAZ panel can read the files.

Thank you for catching this error and we will fix this in the future release. We apologize for the confusion.

Best,

Jinyan
43
Uncertainty Quantification (quoFEM) / Re: Error running through DesignSafe
« Last post by fmk on March 08, 2024, 08:54:06 PM »
so we figured out the issue .. designsafe is requiring further registration information from it's users than was originally requested .. as such it shuts down access to DataDepot, which is where we move files to before launching jobs .. what you have do do on your end is login to designsafe through your web browser and fill in the missing information .. a link to the form should be at the top of the designsafe page after you log in .. if you cannot see the link, try and use Tools/DataDepot and the form to be filled out will appear and not the typical DataDepot webpage will appear .. SimCenter tools will not run at DEsignSafe for you until your information has been updated.
44
Regional Hazard Simulation (R2D, rWhale) / Error in DL calculation
« Last post by Bofan on March 08, 2024, 07:12:44 PM »
Hi,

I use earthquake scenario simulation to obtain HAZ input. However, when I select Spectral Acceleration (SA) as the Intensity Measure in the earthquake scenario simulation and then run my program, the output indicates 'No result to import'. Upon checking the log file, I encountered the following error " f_unit = units[kind.split('_')[0]]
KeyError: 'SA(0.01)'", causing no DL files would be output. I am unsure how to resolve it. Any assistance would be greatly appreciated.

Regards,
Bofan
45
Uncertainty Quantification (quoFEM) / Re: Error running through DesignSafe
« Last post by fmk on March 08, 2024, 04:05:35 PM »
also can you tellme when you signed up for a designsafe account.
46
Uncertainty Quantification (quoFEM) / Re: Problem with Dakota
« Last post by fmk on March 08, 2024, 04:01:00 PM »
how about somebody placing their zipped up ~/Documents/quoFEM/LocalWorkDir/tmp.SimCenter/templatedir folder. thanks.
47
Uncertainty Quantification (quoFEM) / Re: Error running through DesignSafe
« Last post by fmk on March 08, 2024, 03:58:36 PM »
can you send the debug.log file in your ~/Documents/quoFEM directory. thanks
48
Uncertainty Quantification (quoFEM) / Re: Problem with Dakota
« Last post by tripbowler on March 04, 2024, 09:53:31 AM »
Have any solution here?
49
Uncertainty Quantification (quoFEM) / Error running through DesignSafe
« Last post by djk1 on March 01, 2024, 03:54:39 PM »
Hi, I'm trying to run an analysis through DesignSafe but am encountering a 'No such file or directory' error. I checked my RemoteWorkDir folder and found the file listed in the Program Output, so I'm not too sure why it says such file doesn't exist.
50
AI use in Regional Simulation (BRAILS) / Re: Street level images are not being downloaded
« Last post by sklepac on February 08, 2024, 06:37:04 PM »
Thank you! I was able to run the inventory generator with most of the enabled attributes.

It seems to occasionally have issues with building height and/or roof pitch. I can install the new release when it is out and follow up if I am still experiencing issues.
Pages: 1 ... 3 4 [5] 6 7 ... 10