AutoSDA results for 10+ stories

[Anne Hulsey]

Hello,

It looks like the AutoSDA edps above the 10th story are getting collected incorrectly. The attached results have identical edp for the 11-15th and the 1-5th stories. See this (unrestricted) folder for the backend files: https://drive.google.com/drive/folders/1ZjFFgGKpcCBHp27bh84q2LogAQgC1jKI?usp=sharing

Also, would it be possible to collect the peak drifts, in addition to the displacements and accelerations?

Thanks,
Anne

[kuanshi]

Hi Anne,

Sorry about the belated reply and the issue!  Yes, the recording issue was fixed in the commit: https://github.com/NHERI-SimCenter/SimCenterBackendApplications/commit/fe0032cb9cab2b14612a23a388a1b8197000c4fb#diff-6b0fe6bde27069239c0fbc4c5256298688f8deea47233338d53aedf9782518a5 and the peak drifts are available by the commit: https://github.com/NHERI-SimCenter/SimCenterBackendApplications/commit/043edb3f5c26e7d336304bc34a37ddaee7346e3b#diff-6b0fe6bde27069239c0fbc4c5256298688f8deea47233338d53aedf9782518a5.

These two commits have not been in the current release on June 24 but will be included in the next version.  However, just for a quick patch locally, please download the AutoSDA main_program.py from here: https://github.com/NHERI-SimCenter/SimCenterBackendApplications/blob/master/modules/createSAM/AutoSDA/main_program.py and use it to replace the one under your local EE-UQ (in "EE-UQ_Windows_Download/applications/createSAM/AutoSDA").  Plesae feel free to get us back if you have any trouble!

Regards,
Kuanshi

[Anne Hulsey]

This worked perfectly, thank you! I'm not super familiar with opensees recorders. I see the lines in the commit where you added the roof node for roof drifts. But how did these few changes in the main_program.py file actually tell opensees to record the drifts?

[kuanshi]

Thanks for following up!  Yes, the main_program does not directly invoke OpenSees to record but writes SAM files with record-requesting messages that are then parsed by standardEarthquakeEDP and OpenSeesPreprocessor to add recording commands in a model script.  And the model script is called by OpenSees later to run the simulation and saving the requested EDP recordings.

Regards,
Kuanshi

[Anne Hulsey]

Heads up - the new main_program.py was not included in the most recent EE-UQ release. I've replaced it again in my local copy but wanted to highlight this, in case it was unintentional.